weber jointseal PU MC
One-component polyurethane sealant and adhesive
weber jointseal PU MC is a reliable high modulus polyurethane based elastomeric sealant suitable for jointing and high performance bonding. It cures under the effect of atmospheric humidity to form a flexible and resistant joint that has a good resistance to tear and to weather.
After stretching, it recovers its performances. weber jointseal PU MC is suitable for bonding various construction materials and as sealing joint.
It is also easily over painted.
The weber jointseal PU MC sealant conforms to the requirements of ASTM C 920, “Standard Specification for Elastomeric Joint Sealants”, Type S, Grade NS, Class 25, Use T and NT-Type A & M.
Surface of application
Floor, Roof, Wall
UAE | KSA | Lebanon | Oman | Qatar | Kuwait | Jordan | Egypt |
---|---|---|---|---|---|---|---|
280 ml, 600 ml | 280 ml, 600 ml | 280 ml, 600 ml | 280 ml, 600 ml | 280 ml, 600 ml | 280 ml, 600 ml | 280 ml, 600 ml | 280 ml, 600 ml |
- For interior and exterior applications
- Flexible and resistant joint
- U.V rays and climatic ageing resistant
- Very Good adhesion on most construction materials
- Bonding roof tiles and various materials
- Resistance to tear
- Can be easily over painted
- All surfaces should be clean, dry, free from grease, oil or dust and any contaminants that could harm bonding
- Remove old sealant residue completely before applying new sealant .We recommend cleaning concrete with a metal brush
- If necessary, rub down metal surfaces beforehand. After rubbing down, the surface should be re-cleaned.Allow the substrate to dry after degreasing
- For a cleaner job, protect the edges of the joint with self-adhesive masking tape
- If required place a backer rod inside the gap to be filled for correcting the depth
- This product should be used within 24 hours of opening the sausage; otherwise, the sealant could harden inside
- Avoid any contact with non-cured MS, hybrid PU or silicone sealants as well as with alcohols or ammonia during curing