weberdry tar ESB
Solvent-based coal tar epoxy coating for steel and concrete.
A two component based on polyamine cured coal tar epoxy product with outstanding water and crude oil resistance that makes it eminently suitable for use as an anticorrosive on both steel and concrete,on underwater areas (especially where cathodic protection is envisaged). It can also be applied behind linings, in void spaces and ballast tanks
Surface of application
Floor, Wall
UAE | KSA | Lebanon | Oman | Qatar | Kuwait | Jordan |
---|---|---|---|---|---|---|
20 Lit | 20 Lit | 20 Lit | 20 Lit | 20 Lit | 20 Lit | 20 Lit |
- Use as an anticorrosive for steel and concrete on underwater areas
- Excellent chemical resistance to sewage water
- Steel surface should be grit blast thoroughly to Sa 2.5-ISO 8501:1.Previously primed surfaces should be free from loose deposits, rust and grease and also be dry
- New concrete should be allowed to cure at least 25 days prior to overcoating
- Old concrete should be clean, free of any loose material and also dry prior to overcoating
- 5 % dilution with weberepo thinner is recommended on 2 coats
- Good ventilation conditions is recommended
- At application temperatures below 10°C, drying and curing times will be significantly extended