Weber Saint-Gobain - Official website of the company

weberjoint deco

weberjoint deco
weberjoint deco

Product benefits

  • Non-shading color technology
  • Anti-cracks joints up to 7mm
  • Water resistant
  • High abrasion resistance
  • Stain resistance
  • Low shrinkage
  • smooth finishing

High performance polymer modified tile grout with non-shading color technology

weberjoint deco is a high performance polymer modified tile grout with non-shrink properties, excellent workability for grouting tile joints in wet and dry areas for internal and external application.

weberjoint deco is a high stain resistance, and anti-cracks tile grout with non-shading color and very low water absorption characteristics. It is produced with cement and special additives that provide the product excellent properties to meet the requirement of the standards ISO 13007 Class CG2 WA (EN13888) and ANSI 118.7


Product Features

Scope of use

weberjoint deco is suitable for wet and dry areas for floors as well for walls application. It is used between ceramic tiles, marble and natural stones, glass mosaics, earthenware (faience), porcelain, terracotta, etc... And many areas including:

  • Interior and exterior walls and floors
  • Wet areas like kitchens and bathrooms
  • Stairs, balconies, terraces, offices


Appearance powder with wide range of colors
Composition cement, mineral charges, hydrophobic agent, synthetic organic polymers, pigments
Water mixing ratio 0.855 to 1L for 4.5 kg bag
Fresh density 1.9 +/-0.05
Pot life 1 hour 15 minutes

Test weberjoint deco according to ISO 13007

Test results as per ISO 13007
Flexural Strength after freeze-thaw cycles ISO 13007-4 (N/mm²)
Compressive Strength after freeze-thaw cycles ISO 13007-4 (N/mm²)

Abrasion resistance ISO 13007-4

Water Absorption after 30 min as per ISO 13007-4
Water Absorption after 240 min as per ISO 13007-4
Shrinkage as per ISO 13007-4








Results Standard requirements for type CG class 2WA
>2.5 N/mm²

>15 N/mm²

< 1000 mm3

< 2 g

 < 5 g

< 3 mm/m

test weberjoint deco according to ANSI 118.7

Test weberjoint deco ANSI 118.7 standard requirement results
Tensile strength 500 psi. min complies
compressive strength at 28 days 3000 psi. min complies
flexural strength at 28 days 1000 psi. min complies

Applicable standards

ANSI 118.7 (polymer modified cement grout)

ISO 13007 Class C2 WA (EN 13888)


C = 0.18 x E x H x [(L + W) / (L x W)]
C : Consumption (kg/m²)
E : Joint Width (mm)
H : Tile Thickness (mm)
L : Tile Length (cm)
W : Tile Width (cm

Shelf life


weberjoint perfect can be stored for 2 years in its original packaging (in plastic bag), stored away from extreme temperatures and in dry conditions.




Printable TDS (PDF)

Printable MSDS (PDF)

Send or download the documentation

You can either send the documentation to an email address, or download it.

Instructions for use


Before grouting with weberjoint deco, make sure that the adhesive has completely dried; it will depend on site and weather conditions. 24 hours minimum after standard tile adhesives application (webercol flex, webercol plus, webercol fix...) and 4 hours minimum after fast-setting tile adhesives application (webercol fast, webercol F1, webercol flex FS)

Surface preparation

The grooves between all external and internal tile surfaces to be grouted must be sound, dried, and throughly cleaned before the application of the product. All traces of oil or grease must be removed. All loose particles of mortar or tile adhesive in the groove must be physically removed. Joints should be emptied to at least 2/3 of the tile thickness. Before grouting make sure that tiles are set and that the adhesive had completely dried. weberjoint deco can be used for grouting joints width up to 7mm.

Product preparation

Mix 4.5 kg of weberjoint deco with 19 to 22% of clean cool water by adding the powder over the water gradually. The amount of mixing water must be respected to avoid efflorescence over the surface of the grout. An electric mixer with low rotation speed (<300 rpm) should be used. Mix for about 3 minutes until a uniform lump free paste is obtained. Let the paste rest for few minutes before starting the applicaton.

Product application

Apply weberjoint deco with a rubber spatula into the joints diagonally by filling all gaps, make sure that the product is well compacted with no voids.

Cleaning of joint surfaces

Allow the grout to dry (10 or 15 minutes depending on the weather condition) before starting the cleaning process, remove surplus with a damp sponge moving diagonally to prevent removal of grout within the joints. Rinse the sponge frequently with clean water to clean the sponge and remove the grouts residue. Avoid excess of water while cleaning to prevent discoloration of grout. When dry, clean the tiles with a clean, dry cloth. Do not spray water under high pressure and avoid using any chemical cleaning agent on the grout until 3 days after application


For external application, it is recommended to protect the worked area from rain and freezing for 72 hours.

For internal application, avoid water immersion for 72 hours


In case of hot or windy conditions, it is recommended to dampen the joints a few hours after application of weber.joint deco, it improves its final performance


Clean the tools with water after use. Cured materials can only be removed mechanically.

Environmental and Safety

Safety precautions

The product contains cement powders which, when mixed with water, release alkalis that could be harmful to the skin. It is preferable that the application be done in a ventilated area, and to wear protective gear for hands, eyes and respiratory system and to avoid breathing of the dust. Splashes on the skin should be washed away by cleaning thoroughly with soap and water. In case of contact with eyes, wash thoroughly with clean water and seek medical attention. If swallowed, do not induce vomiting and seek medical attention. The product is non-flammable.


While the company guarantees its products against defective materials, the use and application of these products are made without guarantee since the conditions of their application are beyond its control. It is recommended to verify with the company that the product is suitable for the intended use, and that this Data Sheet version is the latest one. The company may modify it without prior notice. Technical characteristics are listed for guidance only. For more information, please contact the company’s office in your location.


The information included on this Technical Data Sheet is the sole property of SODAMCO Holding. The unauthorized disclosure, use, dissemination or copying (either whole or partial) of this data sheet or any information it contains, is prohibited and subject to legal pursuit.

Available packaging

Jordan4.5 kg
KSA4.5 kg
UAE4.5 kg
Qatar4.5 kg; 20 kg
Kuwait4.5 kg
Oman4.5 kg