Weber - Saint-Gobain

weber.col prime

formerly Colle Primer

weber.col prime
weber.col prime

Product benefits

  • Improve adhesion on difficult substrates
  • Ready to apply by brush or roll
  • Increase open time of tile adhesives

Primer before tiling on difficult substrates

weber.col prime is a specially formulated acrylic dispersion for use as a primer before tiling to improve application and adhesion of tile adhesives. weber.col prime prevents over-rapid absorption of water into very absorbent substrate, such as foamed concrete blocks. It prolongs the open time of the tile adhesives.

Product Features

Scope of use

To prepare and stabilize porous surfaces prior to tiling and to improve adhesion of tile adhesives on difficult substrates, such as vinyl tiles, timber, asphalt and terrazzo etc. Also prevents swelling of timber.

Admissible substrates

Especially suitable to prepare difficult substrates, such as vinyl tiles, timber, asphalt and terrazzo etc…

Characteristics

Density Approx 1 kg / lit
Color Milky white
Drying time 1/2 to 2 hours depending on Application rate and climatic Conditions
Service Temperature -20°C to +70°C

Consumption

100 to 300 ml/m2 depending on the roughness and absorbency of the substrate.

Storage

weber.col prime has high storage stability from -20°C to +45°C. Can be stored up to 6 months after manufacturing date, in original packaging.

 

 

Documentation

Printable TDS (PDF)

Printable MSDS (PDF)

Send or download the documentation

You can either send the documentation to an email address, or download it.

Instructions for use

Surface preparation

The substrate must be perfectly sound, clean, dry and free from grease, oil, dust or any contamination that may revent adhesion.

Product application

Shake container well before use. Apply the primer evenly, using a brush, roller or small broom, over the sound, clean and dust-free surface and leave to dry to a clear thin film before applying the tile adhesives. It is important that the primer fill the entire surface to ensure a solid bond of the tile adhesives. Avoid forming of puddles. Extremely porous substrates may require two priming coats.

Cleaning

Clean tools with water when wet.

Environmental and Safety

Safety precautions

Avoid prolonged contact with skin. Wear protective gear for hands & eyes. Splashes on the skin should be washed away by cleaning with soap and water. In case of contact with eyes, wash thoroughly with clean water. If swallowed, do not induce vomiting, in both cases seek medical attention. The product is non-flammable.

Disclaimer

While the company guarantees its products against defective materials, the use and application of these products are made without guarantee since the conditions of their application are beyond its control. It is recommended to verify with the company that the product is suitable for the intended use, and that this Data Sheet version is the latest one. The company may modify it without prior notice. Technical characteristics are listed for guidance only. For more information, please contact the company’s office in your location.

Note

The information included on this Technical Data Sheet is the sole property of SODAMCO Holding. The unauthorized disclosure, use, dissemination or copying (either whole or partial) of this data sheet or any information it contains, is prohibited and subject to legal pursuit.
PG.17
Edition:05/13-A

Available packaging

Lebanon5 L., 15 L., 20 L.
Syria5 L., 15 L., 20 L.
Jordan5 L., 15 L., 20 L.
KSA5 L., 15 L., 20 L.
UAE5 L., 15 L., 20 L.
Qatar5 L., 15 L., 20 L.
Kuwait5 L., 15 L., 20 L.
Oman5 L., 15 L., 20 L.