Weber Saint-Gobain - Official website of the company

webercol paste

formerly Carrofix PY

webercol paste
webercol paste

Product benefits

  • Complies with ANSI 136.1
  • Paste ready to use
  • Tiling over tiles
  • Suitable for gypsum boards
  • Easy to spread and apply
  • Suitable for vertical application
  • Long time life for mixed product
  • Ideal for renovation works

Ready to use pasty tile adhesive

webercol paste is a high performance pasty tile adhesive for interior purpose suitable floors and walls for a wide range of tiles with a non slip properties. It is a ready to use product based only on resins, fillers and plasticizers. weber.col paste sets by evaporation. It can be used in kitchens and bathrooms

Product Features

Scope of use

webercol paste is designed for internal use only.


  • Ceramic tiles
  • Porcelain tiles
  • Unglazed tiles
  • Earthenware tiles
  • Sandstone tiles
  • Molten glass
  • Backed clay
    • Concrete
    • Cementitious plasters
    • Gypsum plasters
    • Gypsum boards and all kind of gypsum partitions
    • Wooden substrates
    • Existing tiles


Appearance Creamy sandy paste
Density 1.8
Test according to ANSI 136.1  
Shear strength, conditioned, after water immersion clause 0.99 N/mm2
Shear strength, conditioned, dry clause 5.2.1 1.02 N/mm2
Shear strength, room temperature, after 28 days air drying clause 5.2.3 1.137 N/mm2
Shear strength, after accelerating aging clause 5.2.4 0.88 N/mm2
Heat resistance Clause 5.3 no shear failure observed
Impact resistance clause 5.4 No bond failure observed after impact
Test according to EN 12004  
Open time 30 min 0.5 MPa
Easy to correct the tiles positioning EN 12004 > 15 min
Wetting capability according to the EN 1347 with weight of 20 N on a glass plate Wetting capability >90% Transfer >80%


Coverage depends on type of trowel and tile:

from 2kg/m2 in dry areas

from 3.4 kg/2 in wet areas


6 months, stored in a fresh and dry area in unopened original packaging.




Send or download the documentation

You can either send the documentation to an email address, or download it.

Instructions for use

Surface preparation

The surface must be leveled and regular. The substrate must be clean, sound, free from all dust, greasy matters, and must be dry. Do not wet the wall nor the tiles.

Product application

The product is ready to use. Apply webercol paste uniformly on the support and use the notched spatula to give the required thickness. Apply the tiles and press them strongly on the substrate in order to spread the product uniformly on the wall. webercol paste will set and seal by evaporation.Joints can be filled with weberjoint perfect or weberjoint deco grout, 24 hours after the sealing of the tiles.

Environmental and Safety

Safety precautions

Avoid prolonged contact with skin. Wear protective gear for hands & eyes. Splashes on the skin should be washed away by cleaning thoroughly with soap and water. In case of contact with eyes, wash thoroughly with clean water and seek medical attention. If swallowed, do not induce vomiting and seek medical attention. The product is non-flammable.


While the company guarantees its products against defective materials, the use and application of these products are made without guarantee since the conditions of their application are beyond its control. It is recommended to verify with the company that the product is suitable for the intended use, and that this Data Sheet version is the latest one. The company may modify it without prior notice. Technical characteristics are listed for guidance only. For more information, please contact the company’s office in your location.


The information included on this Technical Data Sheet is the sole property of SODAMCO Holding. The unauthorized disclosure, use, dissemination or copying (either whole or partial) of this data sheet or any information it contains, is prohibited and subject to legal pursuit.

Available packaging

Lebanon20 kg
Syria20 kg
Jordan20 kg