webertec 311 MC
Non shrink fluid micro concrete
webertec 311 MC is a ready-to-use micro concrete made of selected sand and aggregates, special cement and additives. It can be used where high compressive strength is required. webertec 311 MC is specially formulated to produce a shrinkage compensating micro concrete with high performance. webertec 311 MC can be applied in thickness ranging from 50 mm to 300 mm per layer although greater thickness up to 500 mm can be practiced depending on the design of the repair job and the level of steel reinforcement.
Surface of application
Wall, Roof, Floor
| UAE | KSA | Lebanon | Oman | Qatar | Kuwait | Jordan | Egypt |
|---|---|---|---|---|---|---|---|
| 78 kg | 38 kg | 39 kg | 39 kg | 39 kg | 39 kg | 39 kg | 39 kg |
- Non-shrinking micro concrete
- High strength
- Easy to apply
- Remove damaged concrete and laitance by chipping
- The surface must be free from any trace of grease or oil
- Saturate the surface with water just before application
- The use of additives is prohibited
- If the application temperature is higher than 35°C, make sure to use cold water to keep the temperature of the freshly mixed micro concrete below 30°C
