Weber Saint-Gobain - Official website of the company

weberpas deco 355

weberpas deco 355
weberpas deco 355

Product benefits

  • Good workability properties
  • Aesthetic appeal
  • UV resistant
  • Water resistant

Acrylic textured coating - sanded finish

weberpas deco 355 is a ready to use high performance acrylic based wet render, sanded finish coating, made of acrylic dispersion for stabiliztion. It includes a special selection of graded quartz sand and fillers that contribute to a unique workability properties while giving an exceptional aesthetic appeal to the product. Special additives improve the product resistance to water and UV lights, thus suitable for external and internal applications.

Product Features


Colors The product is available in different colors (white, beige and others)
Paste density 1.97
consumption 3 kg/m2


3 kg per m² depending on site conditions.


12 months from production date in unopened buckets and kept in dry frost-free storage, under cover, off the ground and not in direct sunlight


Printable TDS (PDF)

Printable MSDS (PDF)

Send or download the documentation

You can either send the documentation to an email address, or download it.

Instructions for use

Surface preparation

• Mineral and masonry substrates e.g. cement plasters and cement renders must be completely dry, hard and free of shrinkage and movement

• Remove mould oil from concrete surfaces

• Surface must be flat and without holes or hollows

• For renovation the substrate should be free of old plaster and any loose material and peeling paint

• Repaired areas of the surface should have the same strength and hardness as the existing substrate

Product application

• Remove the lid and mix with a low speed drill and whisk attachment.

• Clean potable water can be added to aid workability; max 0.5 liter per 20 kg bucket; mix thoroughly

• Manually apply with a stainless steel trowel to a carefully controlled thickness not exceeding the aggregate size, maximum 2 mm

• The texture is then achieved with a thin plastic trowel.

• Joints should be pre-determined and can be constructed by carefully butt-joining the edges to achieve a seamless joint.

• Raised or recessed joints must be completely coated.

Quality assurance

weberpas deco 355 is quality controlled by weber management system.

Special recommendation

• For neutralization of the substrate apply weberpas PR 300 one day before the application of weberpas deco 355.

• When using on ETICS system, the HPV factor should not be under 2.

• Application must be continuous; use the same tools and in one direction only.

• Mix buckets together to achieve a homogeneous finish and colour.

• Ideal application temperature 5°C to 35°C; protect from direct sun and rain during application and drying period for minimum 2 days.

• Only use clean tools.

• Use only potable water for mixing and cleaning of tools.

• Windows, window boards, floors must be masked to avoid damage during application.

Environmental and Safety

Safety precautions

The product contains cement powders which, when mixed with water, release alkalis that could be harmful to the skin. It is preferable to do the application a well ventilated area, to wear protective gear for hands, eyes and respiratory system and to avoid dust inhaling. Splashes on the skin should be washed away by cleaning with soap and water. In case of contact with eyes, wash thoroughly with clean water. If swallowed, do not induce vomiting. In both cases seek medical attention. The product is non-flammable.


While the company guarantees its products against defective materials, the use and application of these products are made without guarantee since the conditions of their application are beyond its control. It is recommended to verify with the company that the product is suitable for the intended use, and that this Data Sheet version is the latest one. The company may modify it without prior notice. Technical characteristics are listed for guidance only. For more information, please contact the company’s office in your location.


The information included on this Technical Data Sheet is the sole property of SODAMCO Holding. The unauthorized disclosure, use, dissemination or copying (either whole or partial) of this data sheet or any information it contains, is prohibited and subject to legal pursuit.


Available packaging

Lebanon20 kg
Syria20 kg
Jordan20 kg
KSA20 kg
UAE20 kg
Qatar20 kg
Kuwait20 kg
Oman20 kg