Weber Saint-Gobain - Official website of the company

weberpas deco 322

weberpas deco 322
weberpas deco 322

Product benefits

  • High tensile and elongation strength
  • Resistant to aging and UV resistant
  • Solar and heat reflective

FLEXIBLE WHITE REFLECTIVE WATERPROOF COATING

weberpas deco 322 is a heavy duty flexible acrylic elastomeric waterproofing coating derived from specialty polymer compounds. When applied, it forms a tough, highly flexible, seamless, durable elastomeric membrane for the protection of different kind of roofs and substrates. High reflectivity combined with excellent weather ability, UV resistance and strong adhesion make weberpas deco 322 an effective coating for providing long term reflectivity over a wide range of substrates.

Product Features

Properties

• High tensile strength and elongation

• Heavy duty

• Excellent adhesion to substrate

• Resistance to aging and UV radiation

• Solar and heat reflective

• High water vapor permeability

• Withstands temperature from - 5°C to +110°C

• White color

• Single component easy to apply

• Accepts light foot traffic

• Non flammable and non toxic

Scope of Use

weberpas deco 322 is suitable for the waterproofing and protection of different types of roofs and substrates such as concrete, metal and wood. The application substrate may be horizontal, inclined or having irregular shape.

The properties of weberpas deco 322 will be significantly enhanced by the incorporation of suitable reinforcement, like weber band.

Characteristics

Property Result Test method
Tensile strength (N/cm²) 800 ASTM D 2370
Elongation at break % 580 ASTM D 2370
Flexibility No cracking of film when aged over 10 years of weathering condition and flexed 180 degrees. ASTM D 522
Solid content % 62 (+/-1) ASTM D 1644 ASTM C 1250
Adhesion to substrate (N/cm²) 90 ASTM D 794 ASTM C 903 ASTM D 4541
Density kg /L 1.23 (± 0.05) ASTM D 1475
Hardness shore A 78 ASTM D 2240
Crack bridging test ,mm 3.05 ASTM C 836
Water vapor permeability(gm/m².24hrs) 14.65 ASTM D 1653 ASTM E 96/95
UV resistance at 10,000 hrs No cracking, deterioration or color fade ASTM D 4798
Curing time at 25°C Approx. 48 hrs ASTM G 53/93
Minimum application temperature + 5°C  
Service temperature Approx. -5°C to +110°C  

Consumption

1 kg/m2/coat of 500 microns

Storage

One year after manufacturing date in its original packing non open, protected from frost and heat.

Documentation

Send or download the documentation

You can either send the documentation to an email address, or download it.

Instructions for use

Surface preparation

Substrate (concrete, metal, wooden roofs, tiles,…) must be clean, sound and free from greasy matters and dust. Repair if damaged and remove all traces of paint, mould or oil which may affect the adhesion. Before the application the substrate must be sufficiently cured in a way that any shrinkage has already occurred.

Product application

Apply in two coats, each at an approximate rate of 0.8 kg/sqm, to provide a total of about 2 kg/m2(including the priming coat) weberpas deco 322 can be applied using a brush, roller, squeegee or airless spray equipment. The suitable method may be chosen depending on site conditions.

APPLICATION OF FIRST COAT (PRIMING COAT)

If not diluted before, the first coat of weberpas deco 322 should be diluted with 20% of clean fresh water to act as a priming coat. Ask Technical Department in case of questions. For metal surfaces, dilute it with 30%, to have minimum thickness.

APPLICATION OF SECOND COAT

All corners, patched areas or construction joints should receive mesh reinforcement, like weber band, between the 1st and 2nd layer of weberpas deco 322. Between 1st and 2nd layer of weberpas deco 322, wait for 24 hours (at 25°C temperature and 65% RH).

Environmental and Safety

Safety precautions

Avoid prolonged contact with skin. Wear protective gear for hands & eyes. Splashes on the skin should be washed away by cleaning with soap and water. In case of contact with eyes, wash thoroughly with clean water. If swallowed, do not induce vomiting. In both cases seek medical attention.
The product is non-flammable.

Disclaimer

While the company guarantees its products against defective materials, the use and application of these products are made without guarantee since the conditions of their application are beyond its control. It is recommended to verify with the company that the product is suitable for the intended use, and that this Data Sheet version is the latest one. The company may modify it without prior notice. Technical characteristics are listed for guidance only. For more information, please contact the company’s office in your location.

Note

The information included on this Technical Data Sheet is the sole property of SODAMCO Holding. The unauthorized disclosure, use, dissemination or copying (either whole or partial) of this data sheet or any information it contains, is prohibited and subject to legal pursuit.
PG.03
Edition:07/14-A

Available packaging

Lebanon20 kg
Syria20 kg
Jordan20 kg
KSA20 kg
UAE20 kg
Qatar20 kg
Kuwait20 kg
Oman20 kg