Weber Saint-Gobain - Official website of the company

webercal stone

formerly Stone FIX

webercal stone
webercal stone

Product benefits

  • For mounting and grouting stones
  • Compatible with old and sanded natural stones
  • Breathable
  • Colored

Colored mortar for mounting and grouting stones

webercal stone is a dry ready mixed mortar that requires addition of water only. It is made of hydraulic binders as cement and lime, calibrated aggregates, additives (hydrophobic agent, water retention agent...) and pigments.
webercal stone is impermeable to water but permeable to vapors.
This product is particularly used in mounting and grouting natural stones, and hollow blocks and bricks. It is to be applied in internal and external jobs.

Product Features

Characteristics

Colors The product is available in different colors (white, beige and others)
Grain size < 1.5 mm
Powder density 1.58
Pot life 1 hr at 20°C

Consumption

1.7 kg/m²/mm thickness.

Storage

12 months after manufacturing date in original and  non-open packaging, under cover, in dry condition,  away from humidity, protected from extreme temperatures and direct sunlight.

 

 

Documentation

Printable TDS (PDF)

Printable MSDS (PDF)

Send or download the documentation

You can either send the documentation to an email address, or download it.

Instructions for use

Surface preparation

For grouting works on existing facades prepare the substrates as follows:

  • Remove old grouting material if any
  • Wash the substrate with water to dampen it before starting application

Product preparation

Mix one bag of 50 kg of webercal stone with 6 to 8 liters (half quantity is required for 25 kg bag) of clean water using an electric mixer with low rotation speed (<300 rpm).

Continue mixing until a homogeneous paste of smooth creamy consistency is obtained. Let the mix rest for a few minutes before starting the application

Product application

webercal stone is applied using a stainless steel trowel in a maximum thickness of 3 cm. During application, the temperature should be between + 5°C and + 35°C. After application, protect the freshly applied mortar from direct sun shine and cure it twice a day for 3 consecutive days.

Environmental and Safety

Safety precautions

The product contains cement powders which, when mixed with water, release alkalis that could be harmful to the skin. It is preferable to do the application a well ventilated area, to wear protective gear for hands, eyes and respiratory system and to avoid dust inhaling. Splashes on the skin should be washed away by cleaning with soap and water. In case of contact with eyes, wash thoroughly with clean water. If swallowed, do not induce vomiting. In both cases seek medical attention.
The product is non-flammable.

Disclaimer

While the company guarantees its products against defective materials, the use and application of these products are made without guarantee since the conditions of their application are beyond its control. It is recommended to verify with the company that the product is suitable for the intended use, and that this Data Sheet version is the latest one. The company may modify it without prior notice. Technical characteristics are listed for guidance only. For more information, please contact the company’s office in your location.

Note

The information included on this Technical Data Sheet is the sole property of SODAMCO Holding. The unauthorized disclosure, use, dissemination or copying (either whole or partial) of this data sheet or any information it contains, is prohibited and subject to legal pursuit.
PG.02
Edition:05/14-A

Available packaging

Lebanon25 kg , 50 kg
Syria25 kg , 50 kg
Jordan25 kg , 50 kg
KSA25 kg , 50 kg
UAE25 kg , 50 kg
Qatar25 kg , 50 kg
Kuwait25 kg , 50 kg
Oman25 kg , 50 kg