Weber Saint-Gobain - Official website of the company

webercal SP/T

formerly Decofacade.230 RC - Decofacade.243 SDR

webercal SP/T
webercal SP/T

Product benefits

  • Weatherproof and decorate concrete and masonry
  • Mixes easily with potable water
  • Spray application
  • Available in pre-blended colors
  • Consistent color finish
  • Excellent adhesion
  • Highly durable

Decorative spatter dash colored textured

webercal SP/T is a projected decorative render made of hydraulic binders, additives as hydrophobic and water retention agents and pigments. A special selection of graded quartz sand and fillers contribute to unique workability properties product for interior or exterior applications.

Product Features


- Concrete blocks

- Bricks

- Stone

- Even concrete

- Sub-mortar coating

- Grey plaster.


• Weatherproof and decorate concrete and masonry

• Mixes easily with potable water

• Spray application

• Available in pre-blended colors

• Consistent color finish

• Excellent adhesion

• Highly durable


 One year after manufacturing date in its original packing non open and dry area.


Gun application: 3 to 5 kg/m2 /Tyrolienne application: 5 to 7 kg/m2

Depending on the surface roughness, application and thickness


Colors Available in different colors (white, beige, and others)
Grain size < 2 mm
Powder density 1.35
Paste density 1.62


Printable TDS (PDF)

Printable MSDS (PDF)

Send or download the documentation

You can either send the documentation to an email address, or download it.

Instructions for use

Surface preparation

The substrate must be sufficiently cured in a way that any shrinkage has already occurred. Cracks, voids and holes on old concrete should be repaired prior to application of webercal SP/T. Substrate must be clean, sound and free from greasy matters and dust. Remove all traces of paint, mould oil which may affect the adhesion. Before the application, The substrate should be Saturated Surface Dry (SSD)

Product application

Applicators must be experienced in the use of spray equipment designed specifically for cement based materials. Apply webercal SP/T with a professional type high production plaster spray gun or hopper type gun. Spray a thin, even coat of webercal SP/T into the surface to obtain uniform absorption. Hold the spray nozzle at a 90° angle at a uniform distance from the surface. Immediately double back with the finish coat before the first coat has lost its surface sheen. The finished coating should be 3 to 4mm thick.


Protect the newly applied material from sunshine and wind. The new material should be cured with water for at least three days by spraying 2 to 3 times daily.

Equipment cleaning

Clean mixing and application equipment with water immediately after use. Dried material may require mechanical means for removal.

Environmental and Safety


While the company guarantees its products against defective materials, the use and application of these products are made without guarantee since the conditions of their application are beyond its control. It is recommended to verify with the company that the product is suitable for the intended use, and that this Data Sheet version is the latest one. The company may modify it without prior notice. Technical characteristics are listed for guidance only. For more information, please contact the company’s office in your location.

Safety precautions

The product contains cement powders which, when mixed with water, release alkalis that could be harmful to the skin. It is preferable to do the application a well ventilated area, to wear protective gear for hands, eyes and respiratory system and to avoid dust inhaling. Splashes on the skin should be washed away by cleaning with soap and water. In case of contact with eyes, wash thoroughly with clean water. If swallowed, do not induce vomiting. In both cases seek medical attention.
The product is non-flammable.


The information included on this Technical Data Sheet is the sole property of SODAMCO Holding. The unauthorized disclosure, use, dissemination or copying (either whole or partial) of this data sheet or any information it contains, is prohibited and subject to legal pursuit.

Available packaging





25 kg- 50 kg


25 kg- 50 kg


25 kg- 50 kg


25 kg- 50 kg


25 kg- 50 kg