Weber Saint-Gobain - Official website of the company

webercal 240

formerly Decofacade.240 ED

webercal 240
webercal 240

Product benefits

  • Colored Plaster
  • Fine aspect finishing
  • wide color range
  • Low maintenance

Decorative single layer render

webercal 240 is a colored waterproofing and decorative mortar made of hydraulic binders, additives as hydrophobic and water retention agents and pigments. A special selection of graded quartz sand and fillers contribute to unique workability properties while giving an exceptional aesthetic appeal to the product.
It can also be applied on concrete and brick blocks.

Product Features

Characteristics

Colours The product is available in different colors (white, beige, and others)
Grain size < 2 mm
Powder density 1.35
Paste density 1.62

Consumption

Purpose Waterproofing Decorations
Substrate Concrete blocks, bricks Concrete sub-mortar coating
Rustic 22 kg / m² 18 kg / m²
Scraped 25 kg / m² 21 kg / m²
Float 22 kg / m² 18 kg / m²

Storage

One year after manufacturing date in its original packing non open and in dry area.

Documentation

Printable TDS (PDF)

Printable MSDS (PDF)

Send or download the documentation

You can either send the documentation to an email address, or download it.

Instructions for use

Surface preparation

Substrate must be clean, sound and free from greasy matters and dust. Remove all traces of paint, mould oil which may affect the adhesion. Before the application the substrate must be sufficiently cured in a way that any shrinkage has already occurred. On concrete and non-absorbent substrates use the appropriate company’s weber premix rush-coats.

Product application

1- FOR DECORATIVE WATERPROOFING MORTAR

RUSTIC/KNOC-DOWN RUSTIC

- Apply the first pass to a minimum thickness of 10 mm

-Allow to draw and then spray the decorative coat. The knock-down appearance is obtained by pressing a plastic or stainless-steel float onto the stiffened coat.

SCRAPED

- Apply the product in one coat to a uniform thickness of 15 mm. When sufficiently hard, generally between 3-16 hours after application, the surface is scrapped.

FLOAT

- The first pass is applied to a minimum thickness of 7- 8 mm; when sufficiently hard apply a second pass.

- Allow to harden and then apply a 2nd coat. Finish with a wooden, plastic or sponge backed floats desired.

2- FOR DECORATIVE WATERPROOFING MORTAR

RUSTIC/KNOC-DOWN RUSTIC

- Apply the first pass to a minimum thickness of 10 mm.

- Allow to draw and then spray the decorative coat. The knockdown appearance is obtained by pressing a plastic or stainlesssteel float onto the stiffened coat.

SCRAPED

- Apply the product in one coat to a uniform thickness of 15 mm. When sufficiently hard, generally between 3-16 hours after application, the surface is scrapped.

FLOAT

- The first pass is applied to a minimum thickness of 7-8 mm; when sufficiently hard apply a second pass.

- Allow to harden and then apply a 2nd coat. Finish with a wooden, plastic or sponge backed floats desired.

Environmental and Safety

Safety precautions

The product contains cement powders which, when mixed with water, release alkalis that could be harmful to the skin. It is preferable to do the application a well ventilated area, to wear protective gear for hands, eyes and respiratory system and to avoid dust inhaling. Splashes on the skin should be washed away by cleaning with soap and water. In case of contact with eyes, wash thoroughly with clean water. If swallowed, do not induce vomiting. In both cases seek medical attention.
The product is non-flammable.

Disclaimer

While the company guarantees its products against defective materials, the use and application of these products are made without guarantee since the conditions of their application are beyond its control. It is recommended to verify with the company that the product is suitable for the intended use, and that this Data Sheet version is the latest one. The company may modify it without prior notice. Technical characteristics are listed for guidance only. For more information, please contact the company’s office in your location.

Note

The information included on this Technical Data Sheet is the sole property of SODAMCO Holding. The unauthorized disclosure, use, dissemination or copying (either whole or partial) of this data sheet or any information it contains, is prohibited and subject to legal pursuit.
PG.02
Edition:11/13-A

Available packaging

Lebanon
Syria
Jordan
KSA
UAE
Qatar25 kg
Kuwait
Oman