Weber Saint-Gobain - Official website of the company

webercal 210

formerly Decofacade.210 AD

webercal 210
webercal 210

Product benefits

  • Mosaic appearance on facade
  • wide range of aggregates colors
  • weatherproof and durable

Decorative render with aggregates

webercal 210 is a pre-blended powder mix. The principal binder is Portland cement which performance is reinforced through the addition of powder polymers. It includes additives to improve water retention and adhesion, thus minimizing occurrence of cracks. A hydrophobic agent is also incorporated to improve waterproofing characteristics. webercal 210 is used over cement based substrates where a wide range of aggregates needs to be spread

Product Features

Characteristics

Colours White / Grey
Grain size < 1 mm
Powder density 1.36

Consumption

1.5 kg/m²/mm thickness.

Storage

12 months after manufacturing date in original and  non-open packaging , under cover, in dry condition, away from humidity, protected from extreme temperatures and direct sunlight.

Documentation

Printable TDS (PDF)

Printable MSDS (PDF)

Send or download the documentation

You can either send the documentation to an email address, or download it.

Instructions for use

Surface preparation

Substrate must be clean, sound and free from greasy matters and dust. Remove all traces of paint, mould oil which may affect the adhesion. Before the application the substrate must be sufficiently cured in a way that any shrinkage has already occurred. Directly before the application of weber.cal 210, moisten the substrate and wait until it becomes dry at the surface.

Product application

Before starting the application, we highly recommend to design joints every 25 m². webercal 210 is applied using a stainless steel or plastic corrugated trowel.The material can be applied on a thickness of 5 mm for small aggregates and 10 mm for medium and big ones.While the applied product is still wet, spread the aggregates manually or by a spray gun.

Environmental and Safety

Safety precautions

The product contains cement powders which, when mixed with water, release alkalis that could be harmful to the skin. It is preferable to do the application a well ventilated area, to wear protective gear for hands, eyes and respiratory system and to avoid dust inhaling. Splashes on the skin should be washed away by cleaning with soap and water. In case of contact with eyes, wash thoroughly with clean water. If swallowed, do not induce vomiting. In both cases seek medical attention. The product is non-flammable.

Disclaimer

While the company guarantees its products against defective materials, the use and application of these products are made without guarantee since the conditions of their application are beyond its control. It is recommended to verify with the company that the product is suitable for the intended use, and that this Data Sheet version is the latest one. The company may modify it without prior notice. Technical characteristics are listed for guidance only. For more information, please contact the company’s office in your location.

Note

The information included on this Technical Data Sheet is the sole property of SODAMCO Holding. The unauthorized disclosure, use, dissemination or copying (either whole or partial) of this data sheet or any information it contains, is prohibited and subject to legal pursuit.
PG.02
Edition:11/13-A

Available packaging

Lebanon25 kg
Syria25 kg
Jordan25 kg
KSA-
UAE-
Qatar-
Kuwait-
Oman-